|
Bonded Ceramic/Hard Ferrite Magnets
|
 |
- Composition of hard ferrite magnet powders are embedded in thermoplastic and formed on
injecton moulding machine.
- Possible incorporation of shafts or other insert to the magnet during manufacturing process
- Varieties of shapes, gears, thin ring and many other complicated forms
- Good resistance to corrosion and chips
- Partly and fully magnetizable of magnets
|
Typical Physical Properties |
Parameter |
CY-RB8, CY-RB10, CY-RB14, CY-RB16 |
CY-PB8, CY-PB12, CY-PB15 |
Curie Temperature (°C) |
450 |
450 |
Maximum Operating Temperature (°C) |
85 |
120 |
Density (g/cm3) |
3.6 - 3.7 |
2.6 - 3.7 |
Relative Recoil Permeability (µrec) |
1.3 |
1.3 |
Saturation Field Strength KOe(KA/m) |
10 (800) |
10 (800) |
Temperature Coefficient of Br(%/°C) |
-0.2 |
-0.2 |
Material |
Remanence |
Coercivity |
Intrinsic Coercivity |
Max. Energy Product |
Br (mT) |
Br (kGs) |
bHc (kA/m) |
bHc (kOe) |
iHc (kA/m) |
iHc (kOe) |
(BH)max (KJ/m3) |
(BH)max (MGOe) |
CY-RB8 |
130-180 |
1.30-1.80 |
80-120 |
1.00-1.50 |
100-160 |
1.25-2.00 |
4.00-6.40 |
0.50-0.80 |
CY-RB10 |
180-210 |
1.80-2.10 |
100-140 |
1.25-1.75 |
120-190 |
1.50-2.38 |
6.40-8.00 |
0.80-1.00 |
CY-RB14 |
210-240 |
2.10-2.40 |
140-160 |
1.75-2.00 |
152-200 |
1.90-2.50 |
8.00-11.2 |
1.00-1.40 |
CY-RB16 |
240-260 |
2.40-2.60 |
160-199 |
2.00-2.50 |
199-240 |
2.50-3.00 |
11.2-12.8 |
1.40-1.60 |
CY-PB8 |
87 |
0.87 |
63 |
0.79 |
215 |
2.70 |
1.36 |
0.17 |
CY-PB12 |
220-230 |
2.20-2.30 |
132-148 |
1.65-1.85 |
176-192 |
2.20-2.40 |
8.80-9.70 |
1.10-1.20 |
CY-PB15 |
240-250 |
2.40-2.50 |
167-179 |
2.10-2.25 |
239-251 |
3.00-3.15 |
10.7-11.5 |
1.30-1.50 |
|